My script has a registration form only that captcha does not show the letters:
I'llleavethecodebelow:
<?phpdefine('SI_IMAGE_JPEG',1);define('SI_IMAGE_PNG',2);define('SI_IMAGE_GIF',3);classSecurimage{var$image_width=190;/***ThedesiredwidthoftheCAPTCHAimage.**@varint*/var$image_height=45;/***Theimageformatforoutput.<br/>*Validoptions:SI_IMAGE_PNG,SI_IMAGE_JPG,SI_IMAGE_GIF**@varint*/var$image_type=SI_IMAGE_PNG;/***Thelengthofthecodetogenerate.**@varint*/var$code_length=6;/***Thecharactersetforindividualcharactersintheimage.<br/>*Lettersareconvertedtouppercase.<br/>*Thefontmustsupportthelettersortheremaybeproblematicsubstitutions.**@varstring*/var$charset='ABCDEFGHKLMNPRSTUVWYZ23456789';//var$charset='0123456789';/***Createcodesusingthiswordlist**@varstringThepathtothewordlisttouseforcreatingCAPTCHAcodes*/var$wordlist_file='../words/words.txt';/***Truetouseawordlistfileinsteadofarandomcode**@varbool*/var$use_wordlist=true;/***WhethertouseaGDfontinsteadofaTTFfont.<br/>*TTFoffersmoresupportandoptions,butusethisifyourPHPdoesn'tsupportTTF.<br/>**@varboolean*/var$use_gd_font=false;/***TheGDfonttouse.<br/>*Internalgdfontscanbeloadedbytheirnumber.<br/>*Alternatively,afilepathcanbegivenandthefontwillbeloadedfromfile.**@varmixed*/var$gd_font_file='gdfonts/bubblebath.gdf';/***Theapproximatesizeofthefontinpixels.<br/>*ThisdoesnotcontrolthesizeofthefontbecausethatisdeterminedbytheGDfontitself.<br/>*Thisisusedtoaidthecalculationsofpositioningusedbythisclass.<br/>**@varint*/var$gd_font_size=20;//Note:Thesefontoptionsbelowdonotapplyifyouset$use_gd_fonttotruewiththeexceptionof$text_color/***ThepathtotheTTFfontfiletoload.**@varstring*/var$ttf_file="elephant.ttf";
/**
* The font size.<br />
* Depending on your version of GD, this should be specified as the pixel size (GD1) or point size (GD2)<br />
*
* @var int
*/
var $font_size = 24;
/**
* The minimum angle in degrees, with 0 degrees being left-to-right reading text.<br />
* Higher values represent a counter-clockwise rotation.<br />
* For example, a value of 90 would result in bottom-to-top reading text.
*
* @var int
*/
var $text_angle_minimum = -20;
/**
* The minimum angle in degrees, with 0 degrees being left-to-right reading text.<br />
* Higher values represent a counter-clockwise rotation.<br />
* For example, a value of 90 would result in bottom-to-top reading text.
*
* @var int
*/
var $text_angle_maximum = 20;
/**
* The X-Position on the image where letter drawing will begin.<br />
* This value is in pixels from the left side of the image.
*
* @var int
*/
var $text_x_start = 8;
/**
* Letters can be spaced apart at random distances.<br />
* This is the minimum distance between two letters.<br />
* This should be <i>at least</i> as wide as a font character.<br />
* Small values can cause letters to be drawn over eachother.<br />
*
* @var int
*/
var $text_minimum_distance = 30;
/**
* Letters can be spaced apart at random distances.<br />
* This is the maximum distance between two letters.<br />
* This should be <i>at least</i> as wide as a font character.<br />
* Small values can cause letters to be drawn over eachother.<br />
*
* @var int
*/
var $text_maximum_distance = 33;
/**
* The background color for the image.<br />
* This should be specified in HTML hex format.<br />
* Make sure to include the preceding # sign!
*
* @var string
*/
var $image_bg_color = "#FFFFFF";
/**
* The text color to use for drawing characters.<br />
* This value is ignored if $use_multi_text is set to true.<br />
* Make sure this contrasts well with the background color.<br />
* Specify the color in HTML hex format with preceding # sign
*
* @see Securimage::$use_multi_text
* @var string
*/
var $text_color = "#ff0000";
/**
* Set to true to use multiple colors for each character.
*
* @see Securimage::$multi_text_color
* @var boolean
*/
var $use_multi_text = true;
/**
* String of HTML hex colors to use.<br />
* Separate each possible color with commas.<br />
* Be sure to precede each value with the # sign.
*
* @var string
*/
var $multi_text_color = "#0a68dd,#f65c47,#8d32fd";
/**
* Set to true to make the characters appear transparent.
*
* @see Securimage::$text_transparency_percentage
* @var boolean
*/
var $use_transparent_text = true;
/**
* The percentage of transparency, 0 to 100.<br />
* A value of 0 is completely opaque, 100 is completely transparent (invisble)
*
* @see Securimage::$use_transparent_text
* @var int
*/
var $text_transparency_percentage = 15;
// Line options
/**
* Draw vertical and horizontal lines on the image.
*
* @see Securimage::$line_color
* @see Securimage::$line_distance
* @see Securimage::$line_thickness
* @see Securimage::$draw_lines_over_text
* @var boolean
*/
var $draw_lines = false;
/**
* The color of the lines drawn on the image.<br />
* Use HTML hex format with preceding # sign.
*
* @see Securimage::$draw_lines
* @var string
*/
var $line_color = "#80BFFF";
/**
* How far apart to space the lines from eachother in pixels.
*
* @see Securimage::$draw_lines
* @var int
*/
var $line_distance = 5;
/**
* How thick to draw the lines in pixels.<br />
* 1-3 is ideal depending on distance
*
* @see Securimage::$draw_lines
* @see Securimage::$line_distance
* @var int
*/
var $line_thickness = 1;
/**
* Set to true to draw angled lines on the image in addition to the horizontal and vertical lines.
*
* @see Securimage::$draw_lines
* @var boolean
*/
var $draw_angled_lines = false;
/**
* Draw the lines over the text.<br />
* If fales lines will be drawn before putting the text on the image.<br />
* This can make the image hard for humans to read depending on the line thickness and distance.
*
* @var boolean
*/
var $draw_lines_over_text = false;
/**
* For added security, it is a good idea to draw arced lines over the letters to make it harder for bots to segment the letters.<br />
* Two arced lines will be drawn over the text on each side of the image.<br />
* This is currently expirimental and may be off in certain configurations.
*
* @var boolean
*/
var $arc_linethrough = true;
/**
* The colors or color of the arced lines.<br />
* Use HTML hex notation with preceding # sign, and separate each value with a comma.<br />
* This should be similar to your font color for single color images.
*
* @var string
*/
var $arc_line_colors = "#8080ff";
/**
* Full path to the WAV files to use to make the audio files, include trailing /.<br />
* Name Files [A-Z0-9].wav
*
* @since 1.0.1
* @var string
*/
var $audio_path = './audio/';
//END USER CONFIGURATION
//There should be no need to edit below unless you really know what you are doing.
/**
* The gd image resource.
*
* @access private
* @var resource
*/
var $im;
/**
* The background image resource
*
* @access private
* @var resource
*/
var $bgimg;
/**
* The code generated by the script
*
* @access private
* @var string
*/
var $code;
/**
* The code that was entered by the user
*
* @access private
* @var string
*/
var $code_entered;
/**
* Whether or not the correct code was entered
*
* @access private
* @var boolean
*/
var $correct_code;
/**
* Class constructor.<br />
* Because the class uses sessions, this will attempt to start a session if there is no previous one.<br />
* If you do not start a session before calling the class, the constructor must be called before any
* output is sent to the browser.
*
* <code>
* $securimage = new Securimage();
* </code>
*
*/
function Securimage()
{
if ( session_id() == '' ) { // no session has been started yet, which is needed for validation
session_start();
}
}
/**
* Generate a code and output the image to the browser.
*
* <code>
* <?php
* include 'securimage.php';
* $securimage = new Securimage();
* $securimage->show('bg.jpg');
* ?>
* </code>
*
* @param string $background_image The path to an image to use as the background for the CAPTCHA
*/
function show($background_image = "")
{
if($background_image != "" && is_readable($background_image)) {
$this->bgimg = $background_image;
}
$this->doImage();
}
/**
* Validate the code entered by the user.
*
* <code>
* $code = $_POST['code'];
* if ($securimage->check($code) == false) {
* die("Sorry, the code entered did not match.");
* } else {
* $valid = true;
* }
* </code>
* @param string $code The code the user entered
* @return boolean true if the code was correct, false if not
*/
function check($code)
{
$this->code_entered = $code;
$this->validate();
return $this->correct_code;
}
/**
* Generate and output the image
*
* @access private
*
*/
function doImage()
{
if($this->use_transparent_text == true || $this->bgimg != "") {
$this->im = imagecreatetruecolor($this->image_width, $this->image_height);
$bgcolor = imagecolorallocate($this->im, hexdec(substr($this->image_bg_color, 1, 2)), hexdec(substr($this->image_bg_color, 3, 2)), hexdec(substr($this->image_bg_color, 5, 2)));
imagefilledrectangle($this->im, 0, 0, imagesx($this->im), imagesy($this->im), $bgcolor);
} else { //no transparency
$this->im = imagecreate($this->image_width, $this->image_height);
$bgcolor = imagecolorallocate($this->im, hexdec(substr($this->image_bg_color, 1, 2)), hexdec(substr($this->image_bg_color, 3, 2)), hexdec(substr($this->image_bg_color, 5, 2)));
}
if($this->bgimg != "") { $this->setBackground(); }
$this->createCode();
if (!$this->draw_lines_over_text && $this->draw_lines) $this->drawLines();
$this->drawWord();
if ($this->arc_linethrough == true) $this->arcLines();
if ($this->draw_lines_over_text && $this->draw_lines) $this->drawLines();
$this->output();
}
/**
* Set the background of the CAPTCHA image
*
* @access private
*
*/
function setBackground()
{
$dat = @getimagesize($this->bgimg);
if($dat == false) { return; }
switch($dat[2]) {
case 1: $newim = @imagecreatefromgif($this->bgimg); break;
case 2: $newim = @imagecreatefromjpeg($this->bgimg); break;
case 3: $newim = @imagecreatefrompng($this->bgimg); break;
case 15: $newim = @imagecreatefromwbmp($this->bgimg); break;
case 16: $newim = @imagecreatefromxbm($this->bgimg); break;
default: return;
}
if(!$newim) return;
imagecopy($this->im, $newim, 0, 0, 0, 0, $this->image_width, $this->image_height);
}
/**
* Draw arced lines over the text
*
* @access private
*
*/
function arcLines()
{
$colors = explode(',', $this->arc_line_colors);
imagesetthickness($this->im, 3);
$color = $colors[rand(0, sizeof($colors) - 1)];
$linecolor = imagecolorallocate($this->im, hexdec(substr($color, 1, 2)), hexdec(substr($color, 3, 2)), hexdec(substr($color, 5, 2)));
$xpos = $this->text_x_start + ($this->font_size * 2) + rand(-5, 5);
$width = $this->image_width / 2.66 + rand(3, 10);
$height = $this->font_size * 2.14 - rand(3, 10);
if ( rand(0,100) % 2 == 0 ) {
$start = rand(0,66);
$ypos = $this->image_height / 2 - rand(5, 15);
$xpos += rand(5, 15);
} else {
$start = rand(180, 246);
$ypos = $this->image_height / 2 + rand(5, 15);
}
$end = $start + rand(75, 110);
imagearc($this->im, $xpos, $ypos, $width, $height, $start, $end, $linecolor);
$color = $colors[rand(0, sizeof($colors) - 1)];
$linecolor = imagecolorallocate($this->im, hexdec(substr($color, 1, 2)), hexdec(substr($color, 3, 2)), hexdec(substr($color, 5, 2)));
if ( rand(1,75) % 2 == 0 ) {
$start = rand(45, 111);
$ypos = $this->image_height / 2 - rand(5, 15);
$xpos += rand(5, 15);
} else {
$start = rand(200, 250);
$ypos = $this->image_height / 2 + rand(5, 15);
}
$end = $start + rand(75, 100);
imagearc($this->im, $this->image_width * .75, $ypos, $width, $height, $start, $end, $linecolor);
}
/**
* Draw lines on the image
*
* @access private
*
*/
function drawLines()
{
$linecolor = imagecolorallocate($this->im, hexdec(substr($this->line_color, 1, 2)), hexdec(substr($this->line_color, 3, 2)), hexdec(substr($this->line_color, 5, 2)));
imagesetthickness($this->im, $this->line_thickness);
//vertical lines
for($x = 1; $x < $this->image_width; $x += $this->line_distance) {
imageline($this->im, $x, 0, $x, $this->image_height, $linecolor);
}
//horizontal lines
for($y = 11; $y < $this->image_height; $y += $this->line_distance) {
imageline($this->im, 0, $y, $this->image_width, $y, $linecolor);
}
if ($this->draw_angled_lines == true) {
for ($x = -($this->image_height); $x < $this->image_width; $x += $this->line_distance) {
imageline($this->im, $x, 0, $x + $this->image_height, $this->image_height, $linecolor);
}
for ($x = $this->image_width + $this->image_height; $x > 0; $x -= $this->line_distance) {
imageline($this->im, $x, 0, $x - $this->image_height, $this->image_height, $linecolor);
}
}
}
/**
* Draw the CAPTCHA code over the image
*
* @access private
*
*/
function drawWord()
{
if ($this->use_gd_font == true) {
if (!is_int($this->gd_font_file)) { //is a file name
$font = @imageloadfont($this->gd_font_file);
if ($font == false) {
trigger_error("Failed to load GD Font file {$this->gd_font_file} ", E_USER_WARNING);
return;
}
} else { //gd font identifier
$font = $this->gd_font_file;
}
$color = imagecolorallocate($this->im, hexdec(substr($this->text_color, 1, 2)), hexdec(substr($this->text_color, 3, 2)), hexdec(substr($this->text_color, 5, 2)));
imagestring($this->im, $font, $this->text_x_start, ($this->image_height / 2) - ($this->gd_font_size / 2), $this->code, $color);
} else { //ttf font
if($this->use_transparent_text == true) {
$alpha = intval($this->text_transparency_percentage / 100 * 127);
$font_color = imagecolorallocatealpha($this->im, hexdec(substr($this->text_color, 1, 2)), hexdec(substr($this->text_color, 3, 2)), hexdec(substr($this->text_color, 5, 2)), $alpha);
} else { //no transparency
$font_color = imagecolorallocate($this->im, hexdec(substr($this->text_color, 1, 2)), hexdec(substr($this->text_color, 3, 2)), hexdec(substr($this->text_color, 5, 2)));
}
$x = $this->text_x_start;
$strlen = strlen($this->code);
$y_min = ($this->image_height / 2) + ($this->font_size / 2) - 2;
$y_max = ($this->image_height / 2) + ($this->font_size / 2) + 2;
$colors = explode(',', $this->multi_text_color);
for($i = 0; $i < $strlen; ++$i) {
$angle = rand($this->text_angle_minimum, $this->text_angle_maximum);
$y = rand($y_min, $y_max);
if ($this->use_multi_text == true) {
$idx = rand(0, sizeof($colors) - 1);
$r = substr($colors[$idx], 1, 2);
$g = substr($colors[$idx], 3, 2);
$b = substr($colors[$idx], 5, 2);
if($this->use_transparent_text == true) {
$font_color = imagecolorallocatealpha($this->im, "0x$r", "0x$g", "0x$b", $alpha);
} else {
$font_color = imagecolorallocate($this->im, "0x$r", "0x$g", "0x$b");
}
}
@imagettftext($this->im, $this->font_size, $angle, $x, $y, $font_color, $this->ttf_file, $this->code{$i});
$x += rand($this->text_minimum_distance, $this->text_maximum_distance);
} //for loop
} //else ttf font
} //function
/**
* Create a code and save to the session
*
* @since 1.0.1
*
*/
function createCode()
{
$this->code = false;
if ($this->use_wordlist && is_readable($this->wordlist_file)) {
$this->code = $this->readCodeFromFile();
}
if ($this->code == false) {
$this->code = $this->generateCode($this->code_length);
}
$this->saveData();
}
/**
* Generate a code
*
* @access private
* @param int $len The code length
* @return string
*/
function generateCode($len)
{
$code = '';
for($i = 1, $cslen = strlen($this->charset); $i <= $len; ++$i) {
$code .= strtoupper( $this->charset{rand(0, $cslen - 1)} );
}
return $code;
}
/**
* Reads a word list file to get a code
*
* @access private
* @since 1.0.2
* @return mixed false on failure, a word on success
*/
function readCodeFromFile()
{
$fp = @fopen($this->wordlist_file, 'rb');
if (!$fp) return false;
$fsize = filesize($this->wordlist_file);
if ($fsize < 32) return false; // too small of a list to be effective
if ($fsize < 128) {
$max = $fsize; // still pretty small but changes the range of seeking
} else {
$max = 128;
}
fseek($fp, rand(0, $fsize - $max), SEEK_SET);
$data = fread($fp, 128); // read a random 128 bytes from file
fclose($fp);
$data = preg_replace("/\r?\n/", "\n", $data);
$start = strpos($data, "\n", rand(0, 100)) + 1; // random start position
$end = strpos($data, "\n", $start); // find end of word
return strtolower(substr($data, $start, $end - $start)); // return substring in 128 bytes
}
/**
* Output image to the browser
*
* @access private
*
*/
function output()
{
header("Expires: Sun, 1 Jan 2000 12:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . "GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
switch($this->image_type)
{
case SI_IMAGE_JPEG:
header("Content-Type: image/jpeg");
imagejpeg($this->im, null, 90);
break;
case SI_IMAGE_GIF:
header("Content-Type: image/gif");
imagegif($this->im);
break;
default:
header("Content-Type: image/png");
imagepng($this->im);
break;
}
imagedestroy($this->im);
}
/**
* Get WAV file data of the spoken code.<br />
* This is appropriate for output to the browser as audio/x-wav
*
* @since 1.0.1
* @return string WAV data
*
*/
function getAudibleCode()
{
$letters = array();
$code = $this->getCode();
if ($code == '') {
$this->createCode();
$code = $this->getCode();
}
for($i = 0; $i < strlen($code); ++$i) {
$letters[] = $code{$i};
}
return $this->generateWAV($letters);
}
/**
* Save the code in the session
*
* @access private
*
*/
function saveData()
{
$_SESSION['securimage_code_value'] = strtolower($this->code);
}
/**
* Validate the code to the user code
*
* @access private
*
*/
function validate()
{
if ( isset($_SESSION['securimage_code_value']) && !empty($_SESSION['securimage_code_value']) ) {
if ( $_SESSION['securimage_code_value'] == strtolower(trim($this->code_entered)) ) {
$this->correct_code = true;
$_SESSION['securimage_code_value'] = '';
} else {
$this->correct_code = false;
}
} else {
$this->correct_code = false;
}
}
/**
* Get the captcha code
*
* @since 1.0.1
* @return string
*/
function getCode()
{
if (isset($_SESSION['securimage_code_value']) && !empty($_SESSION['securimage_code_value'])) {
return $_SESSION['securimage_code_value'];
} else {
return '';
}
}
/**
* Check if the user entered code was correct
*
* @access private
* @return boolean
*/
function checkCode()
{
return $this->correct_code;
}
/**
* Generate a wav file by concatenating individual files
* @since 1.0.1
* @access private
* @param array $letters Array of letters to build a file from
* @return string WAV file data
*/
function generateWAV($letters)
{
$first = true; // use first file to write the header...
$data_len = 0;
$files = array();
$out_data = '';
foreach ($letters as $letter) {
$filename = $this->audio_path . strtoupper($letter) . '.wav';
$fp = fopen($filename, 'rb');
$file = array();
$data = fread($fp, filesize($filename)); // read file in
$header = substr($data, 0, 36);
$body = substr($data, 44);
$data = unpack('NChunkID/VChunkSize/NFormat/NSubChunk1ID/VSubChunk1Size/vAudioFormat/vNumChannels/VSampleRate/VByteRate/vBlockAlign/vBitsPerSample', $header);
$file['sub_chunk1_id'] = $data['SubChunk1ID'];
$file['bits_per_sample'] = $data['BitsPerSample'];
$file['channels'] = $data['NumChannels'];
$file['format'] = $data['AudioFormat'];
$file['sample_rate'] = $data['SampleRate'];
$file['size'] = $data['ChunkSize'] + 8;
$file['data'] = $body;
if ( ($p = strpos($file['data'], 'LIST')) !== false) {
// If the LIST data is not at the end of the file, this will probably break your sound file
$info = substr($file['data'], $p + 4, 8);
$data = unpack('Vlength/Vjunk', $info);
$file['data'] = substr($file['data'], 0, $p);
$file['size'] = $file['size'] - (strlen($file['data']) - $p);
}
$files[] = $file;
$data = null;
$header = null;
$body = null;
$data_len += strlen($file['data']);
fclose($fp);
}
$out_data = '';
for($i = 0; $i < sizeof($files); ++$i) {
if ($i == 0) { // output header
$out_data .= pack('C4VC8', ord('R'), ord('I'), ord('F'), ord('F'), $data_len + 36, ord('W'), ord('A'), ord('V'), ord('E'), ord('f'), ord('m'), ord('t'), ord(' '));
$out_data .= pack('VvvVVvv',
16,
$files[$i]['format'],
$files[$i]['channels'],
$files[$i]['sample_rate'],
$files[$i]['sample_rate'] * (($files[$i]['bits_per_sample'] * $files[$i]['channels']) / 8),
($files[$i]['bits_per_sample'] * $files[$i]['channels']) / 8,
$files[$i]['bits_per_sample'] );
$out_data .= pack('C4', ord('d'), ord('a'), ord('t'), ord('a'));
$out_data .= pack('V', $data_len);
}
$out_data .= $files[$i]['data'];
}
return $out_data;
}
} /* class Securimage */
?>
I have tried to force PHP to show the error but nothing happens.
Form Code:
<td><b><?php echo"$registerFormHU"; ?> </b> </td><td> <input type="text" maxlength="6" name="code" autocomplete="off" id='textval' value="" oncopy=”return false” onpaste=”return false” oncut=”return false”/> </td></tr>
<tr><td colspan='2'><img src="securimage_show.php?sid=<?php echo md5(uniqid(time())); ?>"></td></tr>
<tr><td> </td></tr>
<tr><td colspan='2'>